Tunable Laser Product Configuration Tool

The Pure Photonics products come with a wide range of product options. To make you familiar with these options and to allow you to choose the best configuration for you (customization beyond the below is possible) we have created the below interactive configuration matrix. In addition, we have an application note to assist you (Application note device selection).

At every step the matrix will indicate what the standard options are and what is considered a premium option.

Upon pressing the ‘Mail It’ button, the product configuration will be send to our customer service and copied to your email address. If you don’t receive an email you can copy the information in the text field at the bottom and send it to [email protected].

Configurator for laser Your Information

Name:

Email:

Organization:

Application:



Configuration
PPCL-600
PPCL-700
PPCL-500
PPCL-550
PPCL-560
PPCL-590
PPCL-600: telecom-grade micro-ITLA
PPCL-700: sensor-grade micro-ITLA
PPCL-500: PPCL600 in enclosure
PPCL-550: PPCL700 in enclosure
PPCL-560: enclosure with DB9 connector
PPCL-590: gascell locked tunable laser
Logo
Fiber configuration
Bare 250um fiber
900um loose tubing
2mm cable
For most use-cases we recommend the standard 250um bare fiber.
We do provide optional 900um buffer or 2mm cable configuration. We don't guarantee reliability of such fiber configurations, other than that they won't impact the laser performance. They have not been reliability tested.
Logo
Fiber configuration
Adapter
900um loose tubing
2mm cable
3mm cable
Default: Fiber-adapter in module wall.
Optional: fiber exiting module with 900um buffer, 2mm jacket or 3mm jacket.
Connector
FC/APC
FC/PC
LC
SC
None
Several connector options available.
FC/APC is the default.
Performance
Frequency

Standard C-band
L-band (PPCL600 only)
Custom range
    Wavelength Frequency
        Start frequency THz
        Frequency range
THz
Default: C-band (L-band only for PPCL600)
Optional: custom range up to 60nm.

Selected range:
    191.5 - 196.25 THz
    (1528 - 1665 nm)
Power

dBm
Default: 13.5dBm.
Optional: up to 17dBm.
Features PPCL700
✔ Clean Sweep;
    Max. Amplitude GHz
Slow FM modulation with up to 50GHz amplitude.
Default: 50GHz included.
✔ Clean Jump Fast frequency jump from any-to-any frequency.
Default: included.
  No Drift
24h-hrs frequency stability within 1pm (125MHz).
Default: not included.
Optional: included
Low-RIN configuration
Reduced RIN and Phase noise from 50kHz+
Default: included with PPCL700/PPCL550, except when Amplitude Modulation with 1MHz bandwidth is selected. Not included with PPCL600/PPCL500.
Logo
  FM Modulation
Fast frequency modulation (BW 100kHz, 100MHz pk-pk)
Default: not included.
Optional: included
  AM modulation
Fast AM modulation (up to 1 MHz) with associated FM.
Default: not included
Optional: included
  Clean Measurement
Provides 2-channel ADC measurement capability
Allows for detection synchronous with the laser.
  Analog Output
Analog Output Channel.
Evaluation board
None
PPEB700
PPEB600
Cobrite
PPEB700: tunable laser evaluation board
PPEB600: micro-ITLA plug-on board
Cobrite: integrated enclosure solution
No evaluation board selected


Further comments and information:


If your browser does not create an email in your email client when you press 'Mail it', then please copy the below text and send to [email protected]